Bryant ERVBBLHA User's Information Manual

Energy recovery ventilator

Hide thumbs Also See for ERVBBLHA:

Download this manual

ERVBBLHA, ERVBBSHA, ERVBBSVA

ENERGY RECOVERY VENTILATOR

User's Information Manual

ERVBBSHA Unit (Side Port)

For your convenience, please record the model and serial numbers of your new equipment in the spaces

provided. This information, along with the installation data and dealer contact information will be helpful

should your system require maintenance or service.

ENERGY RECOVERY VENTILATOR

Model # _____________________________________

Serial # ______________________________________

ACCESSORIES (List type and model #)

_____________________________________________

ERVBBLHA Horizontal Unit

A05330

NOTE TO EQUIPMENT OWNER:

NOTE TO INSTALLER:

This manual must be left with the equipment owner.

ERVBBSVA Unit (Top Port)

INSTALLATION INFORMATION:

Date Installed ________________________________

DEALERSHIP CONTACT INFORMATION:

Company Name_______________________________

Address______________________________________

_____________________________________________

Phone Number _______________________________

Technician Name _____________________________

_____________________________________________

A07619

A05229

Page 1 ERVBBLHA, ERVBBSHA, ERVBBSVA ENERGY RECOVERY VENTILATOR User’s Information Manual ERVBBSHA Unit (Side Port) For your convenience, please record the model and serial numbers of your new equipment in the spaces provided. This information, along with the installation data and dealer contact information will be helpful should your system require maintenance or service.
Page 2: Safety Considerations
SAFETY CONSIDERATIONS Recognize safety information. This is the safety- -alert symbol When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand these signal words; DANGER, WARNING, and CAUTION. These words are used with the safety- -alert symbol.
Page 3 MAINTENANCE 1. The motors are factory lubricated. Lubricating the bearings is not recommended. 2. The core should be vacuumed every three months to remove dust that would inhibit the energy transfer. Do not use water. The core should only be serviced when the outdoor temperature is between 60°F (16°C) and 75°F (24°C) and dry.
Page 4 Have available the Model No., Series Letter, & Serial No. of your equipment to ensure correct replacement part. Copyright 2007 Bryant Heating & Cooling Systems, 7310 W. Morris St. Indianapolis, IN 46231 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

ErvbbshaErvbbsva