Table of Contents
Advertisement
<JAPANESE CAR>
This unit
USB memory Connection (sold separately)
Connect USB memory
1. Connect the USB cable to the USB connector of the unit, and
then secure the connection using the lock case supplied with
USB cable as shown below.
This unit
2. Connect USB memory to USB cable.
This unit
USB connector
Remove USB memory
Pull out USB memory squarely from the USB cable.
This unit
USB connector
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• Route the USB cable away from another cables, etc.
Front Frame
Screws (M5 × 8)
(Included)
Mounting Bracket
USB memory
(sold separately)
lock case
USB memory
(sold separately)
Cable (supplied)
USB memory
(sold separately)
Cable (supplied)
29
-EN
Advertisement
Table of Contents
