Honeywell RTH7500D Owner's Manual page 32

Step 11. Configure Installer Setup (Cont)
13. If you do not have a number 0190 on the left side of
your display, go to the next page.
14. If you have a number 0190 on the left side of your
display, press the Up or Down arrow to select your
setting for Installer Setup Number 0190.
15. After you select your setting, press the Next button
to go to the next Installer Setup Number.
INSTALLER
SETUP NUMBER
GOES BACK
TO LAST
INSTALLER
SETUP
Installer
Setup
Number
0190
69-1730
Period
Wake Leave
Go Back Next
ADVANCE TO
NEXT INSTALLER
SETUP
Installer
Setup
Name
0 - Changeover Valve in Cooling --
Heat Pump
Changeover
Valve
1 - Changeover Valve in Heating --
Clock More
Done
(Select Your Setting)
Settings
Use this setting if you connected a
wire labeled O to the O/B terminal.
Use this setting if you connected a
wire labeled B to the O/B terminal.
32
SETTING
UP
ARROW
DOWN
ARROW
PRESS TO EXIT
INSTALLER SETUP
M22310