Selecting Options - LG 32VS10MN Owner's Manual

Selecting Options

OPTION
Language : English
Language : English
Input Label
Key Lock : Off
Set ID : Off
ISM Method : Normal
DPM Select : On
Power Indicator : ON
Interface Select : RS232C
▼
Key Lock
Use ∧∨ to select On or Off. The set can be set up so that it can only be used with the remote control.
This feature can prevent unauthorized viewing.
To lock OSD screen adjustment, set the Key Lock tab to the 'On' position.
To unlock it, do the following:
Push MENU on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each set when several set are connected
for display. Specify the number (1 to 99) using < > and exit. Use the assigned Set ID to individually
control each set using the Set Control Program.
* If Set ID is set to Off, you cannot control RS-232C functions.To use RS-232C, Set ID must be
set to a value other than Off.
ISM Method
Leaving a fixed image on the screen for a long time may cause image burn-in. To use the set for a
long period of time, use a screen saver on the PC or utilize the residual image prevention function on
the set, and when the set is not used, turn the power off. Burn-in and related problems are not covered
by the warranty on this set.
Normal: Leave on normal if you don't foresee image burn in being a problem.
Orbiter: May help prevent ghost images. However, it is best not to allow any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen will move every 2
minutes.
Inversion: This function inverts the panel color of the screen. The panel color is automatically
inverted every 30 minutes.
White wash: White wash fills the screen with solid white. This helps removes permanent images burned
into the screen. A permanent image may be impossible to clear entirely with white wash.
User Menus
Language
Chooses the language in which the control names
OK
Move
are displayed.
Input Label
Selects a label for each input source. For example,
when connecting to PC in RGB mode,
* Select "PC" for the connecting device field.
Otherwise, the screen may not display properly.
35