Return to the Top page
Radio
Memory Operation
Auto memory
You can store stations with good reception in
memory automatically.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
1
Touch [
].
Sub function menu appears.
2
Touch desired band key.
3
Touch [
] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [1] or [¡] in the sub
function menu.
Auto memory starts.
42
42
Manual memory
You can store the current receiving station or
channel in memory.
1
Select a station or channel you wish
to store in memory.
2
Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.
Selecting Operation
Preset select
You can list and select memorized station or
channel.
Selecting from the multi function menu
1
Touch the desired number from P1
to P6.
The unit will tune to the selected station
or channel.
Selecting from the preset list
1
Touch illustrated area.
List Control screen appears.
2
Select a station or channel from the
list.
Search by program type
(FM tuner only)
You can tune to a station with a specific
program type when listening to FM.
1
Touch [
] in the control screen.
The multi function menu appears.
2
Touch [PTY] in the multi function
menu.
TUNER PTY Mode screen appears.
3
Select a program type from the list.
4
Touch [Search].
You can search a station of the selected
program type.
Return to the Top page
Radio
Traffic Information
(FM Tuner Only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio
Broadcast Data System that includes the TI
information.
1
Touch [
] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
43