Replacing Battery; Setting Device; Setting The Local City; Setting The Date - Besta All Pass S1 Manual

Replacing Battery

Please install the battery before using the device.
Remove the battery compartment cover, Please insert the
positive and negative pole
of AA Alkaline battery into
the right place. and then
close the battery
compartment cover.

Setting device

After installing the battery,
turn on the device, then
you could go to 時間 > 世
界時間 > 時間設定 to set the localcity, date and time of the
device first, if needed.

Setting the local city

Input the first letter or preceding letters of the city's English
name and choose the right city in the column. Tap the
city's name twice for confirmation.

Setting the date

In the calendar, tap left/right keys to choose the right year
and then tap once on the right dateand time. Finally, tap
完成 for confirmation.
Setting the time
Tap the up/down keys to set up the right hours, minutes
and am/pm. Finally, tap 完成 for confirmation.
Setting the date and time of device
Notes:
1 The power is insufficient when just charged, this means
the battery is no longer useable. Please get a new one.
2 Please use batteries of the same brand, and do not use
the old battery with the new one together.
3 Please insert the batteries correctly according to the
battery box's instruction. Do not mix up the positive and
negative pole of AA Alkaline.
4 Please take out the batteries if the device will be unused
for a long time. Otherwise, the leaked substance may
damage the device
5 Please dump the batteries according to the local rules.
2
→
→