The Panel; Power Source; Replacing Battery; Recharging Battery - Besta CD-737 User Manual

Introduction of the Device

2. The Panel

① The touch panel possesses high penetrability.
② The product adopts 5.0 inch TFT screen.

3. Power Source

One of the following three power sources can be used.
① Rechargeable lithium battery: 3.7V/1270mAh
② Connect with PC via USB cable. (With charging function)
③ A power adaptor with DC output 5V/1A.
* The ② and ③ power source can be used together with the battery.

3.1 Replacing Battery

Insert:
① Remove the battery compartment cover.
② Insert the battery into the compartments.
③ Close the battery compartment cover securely.
Remove:
① Press [ON/OFF] to switch off the power.
② Please remove the battery as instructions above.


3.2 Recharging Battery

If it is the first time to use the device, please recharge battery first. You
can recharge the battery through PC or special adaptor that comes with the
device.
① Through PC: connect the device and PC with USB cable. It takes about
5.5 hours to fully recharge.
② Through adaptor: connect the device and power supply with the
adaptor. One end is inserted into the USB jack, the other is inserted
6