Settings; Settings Overview; Imow Settings - Stihl RMI 422 PC-L Instruction Manual

15 Settings

15 Settings

15.1 Settings Overview

The Settings menu contains 5 submenus, displayed as
buttons:
Robotic mower
Select this submenu to change the robotic mower's
settings, @ 15.2.
Installation
Select this submenu to change and test the
installation, @ 15.3.
Safety
Select this submenu to change the security settings,
@ 15.4.
Service
Select this submenu to confirm replacement of the
mowing blade. This will reset the internal blade
replacement counter. Also select this submenu to find
a wire break, @ 15.5.
Dealer area
This code-protected submenu is accessible only by
your authorized STIHL iMow servicing dealer.

15.2 iMow Settings

Rain Sensor
Adjust the sensitivity of the 5-stage rain sensor.
To set the rain sensor:
► Press the navigation pad to the left or right. The current
value is displayed by means of a line diagram.
0478-131-3050-A
Select this option to allow mowing at higher moisture
levels. If the bar is moved all the way to the left, the
robotic mower will mow even when it is raining.
Select this option to allow mowing under ordinary
ambient conditions.
Select this option to allow mowing only at lower
moisture levels. If the bar is moved all the way to the
right, the robotic mower will only mow if the rain
sensor is completely dry.
Mowing Time
Set the default mowing time for the duration of a
mowing operation when activating automatic mowing
with the "Start mowing" command, @ 14.3.
Delay
Set the length of the delay when activating the "Start
time-delayed mowing" command, @ 14.3.
Status Screen
You can edit the status screen to display the
information you want to appear, @ 13.2.
To set the status screen:
► Select the left or right part of the screen using the
navigation pad and confirm your selection by pressing OK.
► For each part of the display, select one of the following to
appear on the status screen:
Charging status: The battery charging status in
percent will appear on the status screen.
Rem. time: The remaining mowing duration during
the current week will appear on the status screen.
Time and date: The current date and current time will
appear on the status screen.
Start time: The start of the next planned mowing
operation will appear on the status screen. During a
running active time, the text "active" will be displayed.
English
55