Q-See QCW4MP1PT Quick Start Manual page 6

STEP 10
Once the QR code scans, a new screen will appear
with login credentials. Do not edit any of the
credentials. Do not enter a verification code. Tap
OK to continue.
STEP 11
In the next screen, tap "Yes, config Wi-Fi". Enter
your Wi-Fi network's password and before tapping
"Next", place your mobile device within 12" of the
Wi-Fi camera. Click "Next" to proceed. Connecting
may take over a minute. Once connected, the LED
on the front of the Wi-Fi camera will turn solid green.
STEP 12
You should then see the confirmation screen.
Tap Start Live Preview and follow the on-screen
prompt to finalize the setup. If the camera is unable
to connect, try temporarily moving the camera
closer to your Wi-Fi router to complete the setup
process. If that doesn't work, hold the reset button
for 15 seconds and start the process over.