Q-See QCW4MP1PT Quick Start Manual page 3

IMPORTANT: Go through all of
the steps to setup and test your system
before mounting your camera. Visit
www.q-see.com/support to find the
most recent guides and up-to-date support
for your Q-See products.
STEP 3
Download the Q-See Plus app from
the App Store on your mobile device.
Once installed, ensure that your
mobile device is connected to the
Wi-Fi network you wish to use for
your camera. Launch the app on your
mobile device.
STEP 2
Plug the camera into a power
source and wait until the indicator
light begins to flash. After 15-30
seconds the light should slowly flash
green which indicates it is ready to
configure. If the light displays solid
red, hold the reset button for 15
seconds to reset the camera.
STEP 4
Tap on Register
account for the new camera. All
screenshots shown are from the
Q-See Plus app on Android.
and create an