LIST OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS PACKAGE CONTENTS INTRODUCTION Intended use I-LINE PRODUCTS IC 32 / IC 34 / IC 38X S 112i PRO Subwoofer IA 202D / IA 402D WIRING AND INSTALLATION Wiring Installation LCD PLATE AMPLIFIER Overview Screen...
LEVELS (SPL), THAT CAN LEAD TO IRREVERSIBLE HEARING DAMAGE. understanding of the functioning risk of electric shock. SE AUDIOTECHNIK® RECOMMENDS TO RESPECT THE TIMES OF EXPOSURE TO HIGH SPL. of the product. Symbol to alert the user about Symbol for practical tips and ideas...
Notify the shipping company manufacturer. immediately and contact your SE AUDIOTECHNIK® dealer or support center for help and assistance. Refer all servicing to qualified service personnel. This is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled Finally, save the shipping carton as evidence for the possible claim, which can be requested only by you.
Their acoustic design allows for wide horizontal directivity reaching broad sales area of a shop or a bar with sound: the I-Line offers you freedom of choice to compose a setup which audience areas as well as a narrower vertical directivity, depending on the columns installed.
IC 32 / IC 34 / IC 38X REAR PANEL The IC 32, IC 34 and IC 38X conform the column speakers of the I-Line, equipped respectively with two, four and six high-performance 3.5" neodymium drivers. In addition, IC 38X contains two 3.5" coaxial woofers with 0.5"...
S 112i PRO SUBWOOFER The S 112i PRO is an active subwoofer designed specially for the I-Line family. It is composed by a single 12" driver in a bass-reflex configuration, powered by an updated 800 W Class-D amplifier. Furthermore and compared to previous developments, its improved enclosure design reduces port-noise and maximizes system SPL.
IA 202D / IA 402D REAR PANEL I-Line offers two 2-channel class-D power amplifiers with switching mode power supply. IA 202D delivers 2x 250 Watts at 8 Ω, while IA 402D provides 2x 400 Watts at 4 Ω. Each amplifier is equipped with a digital encoder with push button for DSP and preset selection. Our effi- cient DSP engine brings the flexibility to load speaker presets, adjust parametric EQ, delay, filter, gain and polarity settings thus helping with quick and easy system optimisation and sound tuning.
WIRING AND INSTALLATION Finally, the S 112i PRO subwoofer and the IA system amplifiers can input and link audio signals through XLR-3 connectors. They follow the next plug-in and configuration scheme: WIRING Connection Wiring Scheme XLR-3 IN XLR-3 OUT XLR-3 Female XLR-3 Male Click Click...
Page 11
To use optimally the narrow vertical directivity of the IC 34 and IC 38X columns, the SMB or SMBX bracket In addition to the multiple options available in the vertical plane, the SMB or SMBX bracket allows wide can be placed only in this direction, but from two different points: one located in the center and the other angles in the horizontal direction, leading to increased flexibility as shown below.
LCD PLATE AMPLIFIER OVERVIEW SCREEN The S 112i PRO installation subwoofer is equipped with a built-in 48 kHz/24 bit DSP processor, that The Overview screen is the one shown by default on the amplifier LCD, during normal operation provides controlled signal processing and limiting. This DSP core is fed by dual-range inputs to improve (Figure 15).
Preset Library menu allows to load and save DSP processing presets. These are divided in two basic types: MENU Factory presets: these are the default configurations for each SE AUDIOTECHNIK'S® speaker intended > DSP Settings to be used with your subwoofer, and contain the information about factory pre-defined filter and System Settings limiter settings.
Page 14
As mentioned, the current loaded preset is marked with the "*" symbol. By clicking on "Save Preset", a dialogue to define the preset name is displayed. By default, the first characters of the name are the same of the current loaded preset and these can not be changed. PRESET LIBARY Thus, before being able to setting and saving any user preset, a factory preset needs to be active.
Page 15
DSP SETTINGS > HIGHPASS FILTER DSP SETTINGS > DIRECTIVITY (S 112i PRO ONLY) The Highpass Filter section allows to change cut-off frequency of the high-pass protection filter. The lowest Turning the control knob in the Directivity menu activates different directivity options in order to modify possible setting is an electrical 4 order, tuned for S 112i PRO at 36 Hz.
Page 16
DSP SETTINGS > PHASE INVERSION DSP SETTINGS > BYPASS USER EQ In order to compare the response of the subwoofer with and without the applied EQ, this section allows to bypass all user EQs with a single click. PHASE INVERSION Back >...
Page 17
The Output Gain, Input Sensitivity and the Preset selected are not affected by this function. DELAY Back Reset Channel A User User addad delay: Parameters? > Bypass: OFF (DLY, EQ, Filters Samples: 0 Phase Inversion) Time: 0.00 ms Back Distance: 0.00 m >...
Back > Auto Off MCU: Software version of the Micro Controller Unit. FW: Firmware version. Always On Model: model of your SE AUDIOTECHNIK® product. Figure 35. LCD Backlight menu. SW INFORMATION Back > MCU: 0.0.4.2 FW: 20170630 MODEL: S12 PRO 中文...
Finally, IA 402D amplifiers include a wide range of factory presets to be used with L 35 units, an Figure 39. Screen Lock menu. ultra-compact passive line array system from SE AUDIOTECHNIK®. More information about these can be found in the dedicated L 35 user manual, available in our website www.se-audiotechnik.de.
In addition and again in terms of the SPL level produced, each of these quantities will match one S 112i PRO subwoofer. Of course, all this is valid only when the corresponding presets are chosen, both in the IA I-Line amplifiers, and in the S 112i PRO subwoofer.
S 112i PRO SUBWOOFER TECHNICAL SPECIFICATIONS MECHANICAL DRAWINGS PARAMETER S 112i PRO ACOUSTICAL Frequency range (-3 dB) 42 Hz - 99 Hz Frequency range (-10 dB) 36 Hz - 145 Hz Coverage (-6dB) [H x V] Omnidirectional Maximum Peak SPL 133 dB System type 1-way active system...
IA 202D / IA 402D TECHNICAL SPECIFICATIONS MECHANICAL DRAWINGS PARAMETER IA 202D IA 402D 264.70 483.00 ELECTRICAL 252.40 Type Class-D, Switched Mode Power Supply Class-D, Switched Mode Power Supply Channels Rated Output Power (1kHz, THD: < 1%) - 2 x 250 W @ 8 Ω - 2 x 400 W @ 4 Ω...
CORRECT DISPOSAL OF THIS PRODUCT (ELECTRICAL WASTE) (Applicable in the European Union and other European countries with In the unlikely event that the SE AUDIOTECHNIK® product has a recur- separate collection systems) ring failure, SE AUDIOTECHNIK®, at its discretion, may elect to provide a replacement unit of SE AUDIOTECHNIK®...
Page 27
HEAD OFFICE Neuenhofer Strasse 42-44 42657 Solingen, Germany info@se-audiotechnik.de ASIA-PACIFIC DEVELOPMENT CENTER No. 8 Development Zone Road Huimin Sub-district, Jiashan County, Zhejiang, 314112, P.R. China service@se-audiotechnik.com www.se-audiotechnik.de , all rights reserved. The technical data and the functional product characteristics can be subject to modifications. The photocopying, translation, and all other forms of copying of fragments or of the integrity of this user manual is prohibited.