Table of Contents
Advertisement
Features
The Battery Charger has been designed to provide reliable, quality charging for battery systems in
electric drive vehicles. It is a high efficiency wide input voltage charger, the charger can output 1500W at
AC90V~265V in a smaller size. Many creative technology help to realize up to 94% of efficiency, and the
internal temperature is still under 50℃. The following are some new features:
Intelligent control output voltage and current by microprocessor, 100% calibration before
delivery
±1% voltage and current accuracy
Active PFC:
smaller AC input current less interference, and Conform to European Commission
Regulation no 278/2009 and Energy Star Version 2.0
AC
90-265V
worldwide operation: need not any alternative switcher, worldwide safe operation.
Low power consumption
Up to
94%
of convert efficiency.
Programmable output voltage from 10V to 102V
Programmable output current from 1A to 25A
TFT color LCD
Over current, over voltage, over load, over temperature, and short circuit protection
Short-circuit protection on output, safer and more reliable.
2 Intelligent cooling fans turned on and adjust speed upon the temperature automatically
ZVS/ZCS and Synchronous Rectification
assure the highest efficiency.
High power density:
Start at no load or full load
Approved by CE
24 months warranty
Application
Home application
Electric drive vehicles
(less than
1W) at idle mode and standby mode
display output Voltage, current, power and internal temperature on time.
652W/Kg
www.chargery.com
C10325A
v2.2, C10325B V2.2
High efficiency wide input voltage
For 4S~24S LiPo/LiFe battery
PFC programmable Charger
90V~265VAC input
1~25Amps 1500W max.
2
19
page
total
Advertisement
Table of Contents
