Related Manuals for Sices GC315 Link
Summary of Contents for Sices GC315 Link
- Page 1 Link Link Mains+Link Filename: EAAM051205EN Rev. 04 Date 28/02/2019 ID Document: EAAM051205EN Product: GC315Link, GC400Link, GC400Mains+Link GCxxxLink–User and installation guide...
- Page 2 ▪ To send commands to the plant through SMS* messages ▪ To possibly update the FW by remote by using SICES program SicesSupervisor ▪ To receive status or signalling message via email using the Si.Mo.Ne. platform. It 'also present a system for detecting displacements composed of an accelerometer and a gyroscope.
- Page 3 The device necessarily requires a SIM for its operation. 25 mm If you wish to use the packet data functions (communicate with the device through TCP/IP, use of “Si.Mo.Ne” system etc.) a SIM with an internet connection active plan is required. The SIM card in the device determines whether the device supports GSM/GPRS/EDGE, LTE Cat M1 and NB-IoT or all these connections.
- Page 4 7) Close the access cover by pressing in the vicinity of the latches (fig.7). It is now possible supplying auxiliary circuits and MAINS/GENERATOR voltages INFORMATION : Leave the swith on BATTERY OFF when the device does not have the main power supply (JD) and should not be used for a long time: this allows you not to unnecessarily discharge the internal battery.
- Page 5 The networks on which cellular narrowband is deployed, support SMS services over GSM network but do not always over LTE NB-IoT or LTE Cat M1. Several operators have yet not deployed the SMS functionality for Narrowband. Contact your network provider for details. To use the communication on data network mobile it is necessary to configure some parameters.
- Page 6 Link) Link S.0X SERIAL COMMUN. Page S.03 (GC315 or S.04 (GC400 ) shows: LINK module: idle ➢ the active connection type GSM, EDGE, LTE NB-IoT or LTE CAT- Link type: SIM_7000G ➢ the Mobile Network Operator (MNO) currently connected Vodafone (Vodafone, TIM….).
- Page 7 P.0533 the one of the secondary server. It is possible to set the IP address in text format or the server name in full (i.e. “simone.sices.eu”) which will be converted by the controller into IP address using the DNS server (suitably configured or automatic on GPRS). It is possible to disable the connection towards the primary/secondary server setting the empty string.
- Page 8 SICES s.r.l. reserves the right to modify this document without prior notice. SICES has made any effort to ensure that the information herein provide are correct; in any case SICES does not assume any liability for the use these information.
Need help?
Do you have a question about the GC315 Link and is the answer not in the manual?
Questions and answers