Page 3
Marine Survey Kit Description The Marine Survey Kit comprises a weighted silver/silver chloride half-cell, plastic cable spool and an accurate multimeter. The kit has been specially created to include all items required to easily carry out a corrosion survey of marine structures.
Page 4
Instruction Manual Operation If the half-cell is new or has not been used for a long time it should be soaked in a plastic bucket of clean seawater for about 2 hours. It may need longer if the half-cell is very dry. iii.
Page 5
Marine Survey Kit readings have been taken. vi. When surveying is complete turn off multimeter and disconnect all leads. vii. The outside of the half-cell can be dried using a cloth and then be left to dry naturally. Do not immerse the half-cell in fresh water as this will cause viii.
Page 6
Instruction Manual Calibration The Multimeter can be checked against another calibrated meter and a 1.5 volt AA battery. Both meters should read the same battery voltage. If not or no other meter is available then the multimeter should be sent for recalibration. The half-cell can be checked against a K-SAT reference cell (6004-0111).
Page 7
Marine Survey Kit Contact Details Manufacturer: Buckleys (UVRAL) Ltd Address: Buckleys House Unit G, Concept Court Shearway Business Park Shearway Road Folkestone Kent CT19 4RG, UK Tel: +44 (0)1303 278888 Website: www.buckleysInternational.com Distributor details...
Need help?
Do you have a question about the 6004-0093 and is the answer not in the manual?
Questions and answers