Advertisement
18
A U T O M AT I C T R A N S F E R S W I T C H , O T M _ C _ 2 1 D
The DIN rail installation mode is as follows:
First pry out the latch with an appropriate tool, as
shown in Figure 17.
Figure 17. Installation of OTM_C_21D, DIN rail
After attaching the switch to the DIN-rail, push
the latch back to lock it.
Push!
Figure 18. Installation of OTM_C_21D, DIN rail
After attaching the switch to the DIN-rail, make sure you push the latch back to the lock
position, otherwise the switch may fall off.
Advertisement
