Ber(Bit Error Rate) Is High - Ebyte E73-2G4M08S1CX Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

6.3 BER(Bit Error Rate) is high

There are co-channel signal interference nearby, please be away from interference sources or modify frequency and

channel to avoid interference;
The clock waveform on SPI is not standard, check whether there is interference on the SPI line, and the SPI bus line

should not be too long;
Poor power supply may cause messy code. Make sure that the power supply is reliable;

The extension line and feeder quality are poor or too long, so the bit error rate is high.

Copyright ©2012–2020，成都亿佰特电子科技有限公司
E73-2G4M08S1CX User Manual
13