Page 1
USER MANUAL GO 200 ATTENTION: Strictly follow this user manual and pay close attention to all warnings. Please DO NOT operate before reading this USER MANUAL.
Page 2
Neither Humless nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
1. INTRODUCTION 1.1 Foreword This Manual provides a detailed introduction regarding the use of the Humless GO 200. Please read the user instructions thoroughly in order to benefit from all the possibilities your GO 200 can offer. 1.2 Applicable By reading this manual, user can understand usage of, and operate the generator.
1.5 Safety Precaution 1. Please read the “Safety Precautions” before use to ensure safe and proper operation of GO 200. Keep this manual in a safe and secure place. Warranty will be null and void if the user fails to follow all warning and cautions in this manual.
2. Please place the generator in an area where there is good ventilation, away from water, flammable gases, corrosive materials, and other dangerous goods. 3. For extended storage, place unit in dry environment, with temperatures between 32°F~+95°F. 1.7 Work Diagram of the Generator DC source or Car electric products solar panel...
After unpacking, please check if product appearance is damaged or if there are any parts are missing. If so, please contact us (see page i). NO. Item Quantity Humless GO 200 AC charging cord (wall charger) DC Adapter Type-C cord...
3.3 AC ON/OFF button 1. TURN ON THE AC POWER: Press the AC ON/OFF button for 2 seconds. The LED light will turn on and LCD display will show “AC ON”. 2. TURN OFF THE AC POWER: Press the AC ON/OFF button for 2 seconds.
• Describe in detail what error is happening. • Is it possible to repeat the problem, if so what are the steps? • Has this happened before? Solar panels used to charge the GO 200: • Manufacturers name and model • Output power of PV •...
Page 10
Failure Cause Solution Code Battery Damage Contact us at www.humless.com or Protection +1.866.476.2586 1.Please charge immediately, restart Low State of Charge after unit is fully charged. (SOC) protection 2. If still alarms, please contact Humless (see page i). 1.Please charge immediately, restart Battery Low Voltage after unit is fully charged.
Need help?
Do you have a question about the GO 200 and is the answer not in the manual?
Questions and answers