Cisco C220 M3 Setup page 8

Power On and Boot Up Appliance
Source
Dirty
Interface
Dirty
Interface
Dirty
Interface
Dirty
Interface
Power On and Boot Up Appliance
Once you have connected the server peripherals, network interfaces, and power cables, turn on the appliance
and wait for it to boot up. The Cisco screen is briefly displayed.
Figure 6: Cisco Screen During Bootup
Note If you want to configure this interface, press F8 after the memory check is completed and follow the instructions
in CIMC
Server Setup
8
Destination Protocol
Internet TCP
Cisco Umbrella TCP
VirusTotal TCP
TitaniumCloud TCP
Configuration.
Port Action Note
19791 Allow Allow connectivity to Threat
Grid support.
443 Allow Connect with third-party
detection and enrichment
services.
443 Allow Connect with third-party
detection and enrichment
services.
443 Allow Connect with third-party
detection and enrichment
services.
Server Setup