TCT Mobile GIN One Touch 918 Repair Document page 6

GIN/One Touch 918(N/A/D/S) L2 repair document
Plastic Flake
Screwdriver
(TORX6)
4.3 Disassembly Process
The steps of disassembly One Touch 918 are as below.
This module should only be disassembled from bottom to top
Step1: Take off the 6 screws from the furnished frame by screw driver.
Step 2: Separate the main PCBA from furnished frame
ED 1.0
All right reserved. Passing on and copying of this document, use and communication are not permitted
without authorization
By NCK Team
Tweezers
Soldering iron
GIN Level 2 Repair Document
Hot wind gun
Camera Jig
.
10/27