Table of Contents
Advertisement
GIN/One Touch 918(N/A/D/S) L2 repair document
2. VISUAL INSPECTION AND WARRANTY CHECK
2.1 Warranty Check
Warranty confirmation of L1:
IMEI sticker check:
The IMEI number MUST be the same with the one on the IMEI sticker. If not, it‟s out of warranty policy
IMEI label should NOT be removed/ scratch or unreadable/ not approved or provided by Alcatel.
Humidity sticker: Liquid detection on humidity sticker
Visual mechanical check;
1)
Corrosion: corrosion on the USB connectors, SIM connectors, and other metal surfaces
2)
Holes (diam > 1mm): Holes on any surface, including the front casing, furnished frame, battery cover,
touch Lens, keypad...
3)
Big bumps (diam > 1mm): Bumps on any surface, including the front casing, furnished frame, battery
cover, touch Lens, keypad...
4)
Long scratch (length > 3mm): Scratches on any surface, including the front casing, furnished frame,
battery cover, touch Lens, keypad...
5)
Distortion: Bend, twisted or crushed on the h/s, cover/casing or connectors...
6)
Broken: touch broken, casing/cover broken...
7)
Fallen off: Keypad tear off, touch lens, connectors fallen off ...
8)
Gap: External physical damage relating to abnormal use, like front case and frame opened
9)
Others:
- Damage caused by disassembly like wrong part assembly, lost of components
- Use in abnormal environment like too high temperature with plastic melts
2.2 Pretest
Check that the SIM card is set correctly
Insert the end-user battery.
Power on the cell phone.
If the cell phone can not be power on, visually check the condition of the battery connector
replace the battery if necessary.
If the cell phone asks to input NCK code, which means it is SIM locked, and can only be worked with
ED
1.0
All right reserved. Passing on and copying of this document, use and communication are not permitted
without authorization
By NCK Team
GIN Level 2 Repair Document
and
5/27
Advertisement
Table of Contents
