Installation - IGF 4000 Manual For Use And Maintenance

I.G.F. Italstampi
01.04 Safety Principles
BEFORE TURNING ON THE MACHINE
ARISE
THAT THE PEOPLE CONCERNED KNOW AND ADHERE TO THE CONTENTS OF THE MANUAL
DURING PHASES OF RESEARCH OR REMOVAL OF ANY CAUSE OF DAMAGE OR INCONVENIENCE CON-
CERNING THE MACHINE
OR THINGS
NETWORK
AT THE END OF ANY INTERVENTION THAT REQUIRES THE REMOVAL OR THE NEUTRALIZATION OF ANY
COMPONENT CORRELATED TO SAFETY
THE PUTTING BACK INTO OPERATION ENSURING THE CORRECT POSITION AND EFFECTIVENESS
IT IS ABSOLUTELY FORBIDDEN TO NEUTRALIZE
INEFFICIENT
CHINE
FECT CONDITION AND WORKING ORDER
02

INSTALLATION

02.01 Packaging Contents
On delivery, this Manual for the Use and Maintenance containing the Declaration of Conformity of the
product with the EC regulations, isattached to the machine and considered an integral part of it.
The machine arrives in a single package ready for use.
Take care to handle the box only manually, always keeping it in an upward position as indicated on
the box.
02.02 Connections
Before positioning the Machine, ensure that the bearing surface is a horizontal level. If the wheels are
present, insert them onto the special feet.
Once positioned, connect the machine to the electric power supply, after having;
◊
ensured that the tension and frequency of the power supply correspond to that written on the
plate;
◊
ensured that that socket is connected to earth.
◊
taken steps to have the proper plug (16 + 32A) to a 5 pole wire (3 phases, neutral and earth),
attached by specialised, capable personnel.
The Manufacturer specifies that the mains line should be equipped with safety devices by a differential
switch, co-ordinated with the general earth installation, in conformity with the local and national laws.
Check that the safety devices of the Machine are present and assembled before activating the ma-
chine.
Check also that the auger and the knife, small wheel: if this is not the case, invert the arrangement of
the phases.
CONNECT THE MACHINE ONLY TO PARTS OF THE ELECTRICAL PLANT WHICH ARE INDIVIDUALLY PRO-
TECTED
,
EVERY OPERATOR IS OBLIGED TO CAREFULLY READ THE INSTRUCTIONS FOR USE
,
TAKE ALL NECESSARY MEASURES TO PREVENT ANY DAMAGE TO PEOPLE
.
REMOVE THE ELECTRIC TENSION
)
BEFORE APPROACHING THE PROTECTIVE DEVICES
,
ANY PART OF THE SAFETY DEVICES
,
WHEREVER POSITIONED
,
AND EVERY TIME A DOUBT ABOUT ITS WORKINGS SHOULD
(
SEPARATION OF THE MACHINE FROM THE ELECTRIC
( ,
BARRIERS SENSORS
,
REMOVE
,
PROTECTIVE DEVICES
.
ALL THE PROTECTIVE AND SAFETY DEVICES MUST BE KEPT IN PER-
.
.
, ,
PROTECTIONS ETC
,
MODIFY OR IN ANY OTHER WAY RENDER
,
OR CONTROLS OF THE MA-
PAGE: 18
.
ENSURE
.
.),
CARRY OUT
.