Installing the LTE Modem Module and Pancake Antenna
This LTE modem module and pancake antenna provides you with the latest standard for connectivity between your
WeatherTRAK controller and the cloud.
Materials Provided
Cloud Update Key
LTE Pancake Antenna with attached
star washer and nut
Modem Module
2 long screws
1 short screw with attached star washer
Part 1: Update the Controller Firmware
Open the controller enclosure so you can see the
control panel.
Loosen the 4 corner pop-up screws and lift the
1
control panel from the cabinet.
Locate the USB port on the back side of the control
panel.
If an OptiFlow key or Cloud Update Key is
2
installed, remove it and set it aside.
©2019 HydroPoint Data Systems Inc. All rights reserved.
Pro3 & OptiFlow XR Controllers
Equipment Needed
Phillips screwdriver
Flathead screwdriver
1" wrench or adjustable wrench
Silicone: 3M™ Clear Super Silicone 08661 or similar
Towel or something clean and dry to place the control panel
on while replacing the antenna and the modem module
Putty knife for cleaning off old silicone
Cleaning wipes, such as Lysol® Disinfecting Wipes or similar
to clean controller enclosure surfaces before applying
silicone
1
800.362.8774 hydropoint.com