Table of Contents
Advertisement
10.
11.
ELEVATOR PUSHROD
INSTALLATION
Install the elevator control horn using
the same method as with the aileron con-
trol horns.
Position the elevator control horn on
the both side of elevator.
1.
Elevator control horn.
hread one clevis and M2 lock nut on
to each elevator control rod. hread the
horns on until they are lush with the
ends of the control rods.
Elevator and rudder pushrod assembly
shown in photos below.
2.
Locate items necessary to install rudder
pushrod.
3.
4.
.
550mm.
33
Advertisement
Table of Contents
