Craftsman CMEPW2100 Instruction Manual page 7

Fig. D
Assemble Crossmember and Spray Handle
Storage Hook (Fig. E)
Your pressure washer is not fully assembled in the carton.
1. To assemble the crossmember
frame handle 24 , align the four screw tabs
the back of the crossmember
four slots 30 in the frame handle
crossmember 28 onto the frame handle
2. Insert the four retaining screws
handle 24 and use a screwdriver to fully tighten the
screws. Ensure the crossmember
the frame handle 24
3. To assemble the spray handle storage hook
frame handle 24 , align the two screw tabs
back of the spray handle storage hook
slots 34 in the frame handle and place the spray handle
storage hook 32 onto the frame handle
4. Insert the two retaining screws
handle 24 and use a screwdriver to fully tighten the
screws. Ensure the spray handle storage hook is fully
secured to the frame handle.
Fig. E
32
33
28
High Pressure Hose Storage Hook (Fig. F)
Your pressure washer is not fully assembled in the carton.
1. To assemble the high pressure hose storage hook
to the crossmember
the hook so it will slide between the retaining slots
on the rear of the crossmember
24
25
27
26
7
28 to the
28 with the with the
24 and place the
24
31 through the frame
28 is fully secured to
.
32
33
32 with the two
24 .
31 through the frame
29
30
31
30
34
28 , squeeze the detent end
28 .
2. Release the pressure hose storage hook
detents
3. Press the high pressure hose storage hook
locking detents
until it clicks into place.
Fig. F
29 on
.
Power Cord Storage (Fig. G)
Your pressure washer is not fully assembled in the carton.
1. Insert power cord storage retaining hooks
retaining holes
to the
on the
2. Rotate power cord storage upward and past the detent.
The power cord storage will click firmly into place.
Fig. G
24
Attaching Spray Wand (Fig. H)
1. To connect the spray wand
insert the end of the spray wand inside the spray handle
and turn the spray wand clockwise until its firmly in
working position.
Fig. H
35
36 of
37
36 to rest securely in the retaining slots
on the rear of the crossmember
38
28
37
36
38
40 as shown in Fig. G.
39
2 to the spray handle
2
English
35 allowing the
37 .
onto the
35
28
35
39 into two
40
3 ,
3
5