Cushion And Cover Placement - Permobil ROHO AirLITE E2605 Operation Manual

Cushion and Cover Placement

Note: Refer to the label on the bottom of the cushion and to the image on the cover to
correctly orient your cushion and cover.
Cushion Placement:
1. Place the cushion directly on the seat.
Note: If a seat insert is used, place it
inside the cover, beneath the foam base.
When possible, use the hook or loop
fasteners to further secure the cushion to the
seating surface.
2. Have the individual sit on the cushion,
making sure the boniest prominences are
supported by the air cells.
Check to make sure that the cushion is
properly sized to the individual and the
wheelchair.
Cover Removal: Unzip the cover. Remove the
cover from the cushion.
Cover Placement:
1. Unzip the cover.
2. Insert the cushion into the cover, front edge
first, with the contoured foam facing up.
3. Close the zipper.
Warnings:
- The AirLITE must be used with the supplied cover.
- Inspect the cover for damage and replace if necessary.
- Inspect the foam portion of the product for damage and replace if necessary.
ROHO AirLITE Cushion Operation Manual
4
Zipper in Back
The seated
figure shows
standard
orientation.
Front