Advertisement
Possible malfunctions and possible solutions,
Status
Power LED: OFF
Check procedure
power/UPS/battery
(check presence on VACC and
GND)
Call support
If the device is powered by a battery it might be depleted or disconnected. If the
device is powered by a UPS the AC mains might not be connected or there might be
blown fuse. If the device is powered by a power supply connected to the AC mains
there might be a blown fuse or a mains failure.
SCOM100: Troubleshooting
Remote control and alarming
Possible reasons
- No direct power supply
- No power supply from UPS
- Unit failure
Check list for SCOM
- Check main source power supply
- Check charging of UPS
- Visual inspection of unit
Call support
SCOM100
2
Advertisement
