Page 1
CUTTER POWER SAW 16” 3200W ITEM # 50120 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO SERIAL NUMBER FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.4900...
SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury and/or property damage. Save all warnings and instructions for future reference. The warning and safety instructions in this manual are not meant to cover all possible conditions and situations that may occur.
Page 3
SAFETY WARNINGS Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Page 4
SAFETY WARNINGS INSTALLATION CAUSES AND OPERATOR PREVENTION OF KICKBACK: • Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; • When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator;...
Page 5
ASSEMBLY 1. Connect the cutting blade to the arbor using the lock nut supplied. 2. Secure the blade into the saw and tighten the bolt. 3. Place the guide over the blade and secure it in place using the screw nut provided.
Page 6
ASSEMBLY ASSEMBLY INSTALLATION 4. Connect the other side of the guide using a screw nut. 5. Attach the stationary knob and confirm it will allow you to adjust the depth. 6. Press in the hose adapter for water applications.
OPERATION OPERATING THE HOSE REEL 1. Slowly pull the hose reel to desired length. A ratcheting mehanism inside the reel makes a short series of clicking sounfs every revolution of the reel. 2. To lock the real into postion, listen for the clicking sounds as the hose is slowlyy oulled from the reel. When the reel clicks, stop pulling the hose.
Page 8
OPERATION REPLACING HOSE 1. Secure and stabilizing reel. In most cases, the hose can be replaced with reel still mounted. 2. Disconnect the incoming air supply. 3. Pull out entire length of the hose and lock reel. Make sure reel is securely locked in place. 4.
OF NOTE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 50120 and is the answer not in the manual?
Questions and answers