Download Print this page

The Rear Panel - Crate TX15 Manual

Battery powered amplifier

Advertisement

C R A T E T A X I • T X 1 5

THE REAR PANEL:

13. DC CHARGER PLUG: Use this
jack to connect the 15VDC charger
to the amplifier to recharge the
battery (power switch off) or to
supply power to the amplifier while
playing (power switch on). Plug the
charger into an AC outlet of the
proper voltage as listed on the
charger.
NOTE: The 15VDC charger will
recharge the amplifier's battery
only when the amp is not being
played. If the amplifier is being
played while the charger is con-
nected and plugged into a source
of AC power, the battery will nei-
ther charge or discharge.
6
14. LED: This LED illuminates when
the amplifier is being charged.
Once the battery is fully charged,
this LED should go out. (See page
4 for complete information on the
power supply.)

Hide quick links:

Advertisement

loading