Safety & Warnings - Uniden Ui15 Instruction Manual

Cellular signal boosters
Table of Contents

Advertisement

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
INSTALLATION INSTRUCTIONS FOR THE
FOLLOWING CELLULAR BOOSTERS:
!
Turn AC power OFF at the main circuit breaker before
working on any electrical connections.
All AC power wiring and coaxial cable wiring must
to local or national codes.
The AC rated input power must be within 10% of the voltage
requirements of the device.
When grounding the system, a solid copper conductor no
smaller than 8 AWG should be used.
DO NOT connect a ground wire to a gas supply line.
DO NOT open the booster. Touching internal parts could
cause injury or damage. This will void the waranty.
1
SAFETY AND WARNINGS
3
conform

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ui25Ui35

Table of Contents