Advertisement
Sapper™ Features: Friction Adjustment and Anti-Dislodgement
TILT AND ROTATION FRICTION ADJUSTMENT
Tools Needed:
Allen Wrench (in inches)
- Tilt friction -
3
/
" (Included on Monitor Plate)
16
- Rotation friction -
3
/
" (C) (Included on Monitor Plate)
16
Tilt friction:
To increase friction, insert Allen wrench (included on each monitor
plate) (A) into screw (B) and turn clockwise. To reduce tilt friction, turn
screw (B) counterclockwise. Adjust in very small increments.
Rotation friction:
To increase friction, insert Allen wrench (A) (included on each monitor
plate) into screw (C) and turn clockwise. Adjust in very small increments.
B
A
Tilt friction
Rotation friction
Horsepower™ Installation Guide
July 2016
B
A
C
A
ANTI-DISLODGEMENT AND THEFT DETERRENCE
Tools Needed:
Allen Wrench (in inches)
- Anti-theft -
1
/
" (A)
16
1. Sapper monitor arms have anti-theft features. A small set screw (A)
resides inside the lower end of the fast release pin (B). To activate anti-
theft feature, use a
1
/
" Allen wrench and back set screw (A) partially
16
out of fast release pin (B). This prevents fast release function.
2. Also, the stop screw (C) at the top of the mast (D)
prevents monitor from being removed.
A
set screw
A
D
Horsepower
B
C
™
21
Advertisement
