Page 2
10. Rotate the height adjustment knob (C) to base mounting bracket (H) and attach the VESA plate can accommodate 75mm or the desired height. (Note: The Knoll logo on base mounting bracket (H) using (4) M6-1 100mm hole patterns. Knoll movement joints the adjustment knob should be face up.)
Page 3
™ Sapper™ Horsepower Mount for 20lb. Monitor Horsepower Single Mast Monitor Support Horsepower Assembly £ " £ § & Horsepower™ Installation Guide July 2016...
Page 4
™ Sapper™ Horsepower Mount for 20lb. Monitor Horsepower Cord Manager Clip (D) (preinstalled) Mast (A) Step 6 M6-1 x 25mm Flat Head Machine Screw (L) Step 3,4 & 5 Top Mounting Bracket (K) Top Mounting Bracket Bushing (J) M6 Spring Nut (I) Top Beam Bottom Beam Step 1...
Page 5
™ Sapper™ Horsepower Mount for 20lb. Monitor Horsepower Mast Cap (B) (preinstalled) Step 9 & 12 Step 13 Movement Joint Assembly (O) Fast Release Pin & Anti-theft Set Screw (N) (preinstalled) Step 14 & 15 Step 11 Sleeve Mount (M) Stop Screw (E) (preinstalled) Step 10 Height Adjustment Knob...
Page 7
11. Rotate the height adjustment knobs (C) to VESA plates do not ship with screws and beam of the Horsepower assembly with the desired height. (Note: The Knoll logo on are designed to accept an M4 or M5 screw; the spring tabs facing downward.
Page 8
™ Sapper™ Horsepower Mount for 30lb. Monitor Horsepower Double Mast Monitor Double Mast Monitor Support (200x200) Support (100x100) Horsepower Assembly Horsepower Assembly £ " £ " " £ & ¦ ¦ " £ & § § Double Mast Monitor Support (400x400/600) Horsepower Assembly £...
Page 9
™ Sapper™ Horsepower Mount for 30lb. Monitor Horsepower Cord Manager Clip (D) (preinstalled) Mast (A) Step 6 M6-1 x 25mm Flat Head Machine Screw (L) Top Mounting Bracket (K) Step 3, 4 & 5 Top Mounting Bushing (J) M6 Spring Nut (I) Top Beam Bottom Beam Step 1...
Page 10
™ Sapper™ Horsepower Mount for 30lb. Monitor Horsepower Double Mast Monitor Support (100x100 Shown) Step 8 Front of Horsepower Assembly " £ £ " ¡ ¦ ¦ & Horsepower™ Installation Guide July 2016...
Page 11
™ Sapper™ Horsepower Mount for 30lb. Monitor Horsepower Step 10 & 13 Mast Cap (B) (preinstalled) Step 15 & 16 Fast Release Pin & Anti-theft Set Screw (N) (preinstalled) Step 12 Sleeve mount (M) Step 14 (left to right) VESA Mount Plate (100x100) (O) Step 10 &...
Page 12
™ Sapper™ Features: Cable Management and Fast Release Horsepower CABLE MANAGEMENT CLIP(S) FAST RELEASE Manage cables down mast (C) and install cable management clips (D) by 1. Fast release functionality allows rapid removal of monitor and snapping clip (D) over cables and onto mast (C). Please note there will movement joint.
Page 13
™ Sapper™ Features: Friction Adjustment and Anti-Dislodgement Horsepower TILT AND ROTATION FRICTION ADJUSTMENT ANTI-DISLODGEMENT AND THEFT DETERRENCE Tools Needed: Tools Needed: Allen Wrench (in inches) Allen Wrench (in inches) - Tilt friction - " (Included on Monitor Plate) - Anti-theft - "...