Torque Wrench Information; Hp 8509X Rf Ecal; Hp 8506X Microwave Ecal - HP 85091A Reference Manual

Specifications and Characteristics

Torque Wrench Information

Torque Wrench Information

HP 8509X RF ECal

Table 2-21 HP 8509X RF Ecal Torque Wrench Information
Torque Wrench
Wrench Opening
1
Part Number
8710-1764 20 mm
8710-1765 5/16 in
8710-1766 3/4 in
8710-1766 3/4 in
3/4 in
3
8710-1766
8710-2174 1 1/16 in
1. A torque wrench is not included with the type-F kit. If a torque wrench is
needed, use one with a wrench opening of 12 mm and a torque setting of
170 N-cm.
2. Many older HP calibration kit manuals list different torque tolerances for
the various torque wrenches. The correct torque tolerance for HP torque
wrenches is ±10% of the torque setting as listed in this table.
3. Recommended (but not supplied) with the HP 85096A.

HP 8506X Microwave ECal

Table 2-22 HP 8506X Microwave ECal Torque Wrench
Information
Torque Wrench
Wrench Opening
Part Number
8710-1764 20 mm
8710-1765 5/16 in
8710-1766 3/4 in
8710-1766 3/4 in
2-16
Connector Torque
Type Setting
3.5 mm 90 N-cm (8 in-lb)
3.5 mm 90 N-cm (8 in-lb)
135 N-cm (12 in-lb) ± 13.5 N-cm (± 1.2 in-lb)
7 mm
Type-N 50 Ω 135 N-cm (12 in-lb) ± 13.5 N-cm (± 1.2 in-lb)
Type-N 75 Ω 135 N-cm (12 in-lb) ± 13.5 N-cm (± 1.2 in-lb)
226 N-cm (20 in-lb) ± 22.6 N-cm (± 2 in-lb)
7-16
Connector Torque
Type Setting
3.5 mm 90 N-cm (8 in-lb)
3.5 mm 90 N-cm (8 in-lb)
135 N-cm (12 in-lb) ± 13.5 N-cm (± 1.2 in-lb)
7 mm
Type-N 50 Ω 135 N-cm (12 in-lb) ± 13.5 N-cm (± 1.2 in-lb)
Torque
2
Tolerance
± 9 N-cm (± 0.8 in-lb)
± 9 N-cm (± 0.8 in-lb)
Torque
Tolerance
± 9 N-cm (± 0.8 in-lb)
± 9 N-cm (± 0.8 in-lb)
Chapter 2