Battery Status - Honeywell DEX-BLE-10 Quick Start Manual

Preliminary Draft, Not for Release, For Review Purposes Only

Battery Status

The green LED indicates the status of the battery charge.
Note: The LED behavior differs if the DEX-BLE-10 is connected to an
external power source (e.g., power cable and wall charger) instead
of using battery power.
Power
External (Cable/
Power Source)
External (Cable/
Power Source)
Battery
Battery
Battery
* LED status after initial device power on sequence.
Preliminary Draft, Not for Release, For Review Purposes Only
LED Status
Flash
Solid
Flash
5-seconds On
5-seconds Off*
Off*
Solid
5-seconds On
5-seconds Off*
Description
Battery charging
Battery fully charged
Battery Low,
Less than 20%
Battery Charge is between
20% and 80%.
Battery Fully Charged
10