Advertisement
Important note for usage
• For wipe clean function, suitable for hard floor, wooden floor, tile. DO NOT
use it on carpet.
• Before usage, it is recommended to remove the hair and dust of the two side
brushes to avoid affecting the machine operation/performance.
• In order to avoid friction between the velcosticker and the hard floor, we
suggest sticking the cleaning cloth when vacuum cleaning.
• Take out the combined container from unit under top cover;
• Open the water inlet cover and add water. (125ml)
• Close the water inlet cover properly and place back the combined container
(dust box and water compartment box) in vacuum cleaner.
• Must remove the semi-wet cleaning cloth and water in tank after every use. It
avoids direct contact with the floor for a period of time while charging, it may
cause hygiene issues and machine performance.
Note: the cleaning cloth needs to attach to the bottom of the vacuum cleaner
when using wipe cleaning function.
ASSEMBLY & OPERATING INSTRUCTION
Side brush explanatory chart
Left side brush
White
• The edge of the brush (as shown above in the center color) is not interchangeable.
• In order to ensure good use effect, users should clean the surrounding hair
and other debris in time after using the vacuum cleaner for a period of time.
• The user should change the side brush according to the diagram left and
right.(use the Phillips-screwdriver to remove the fixed screw and side brush)
• For the user to have good cleaning experience, please use the appliance
carefully. Before cleaning, you can remove the winding object on the floor.
(eg. Hair, Power cord) to help the vacuum cleaner avoid blocking the way.
Right side brush
Orange
7
Advertisement
