Advertisement
CONFIGURATION PROFILES
FULL INSTRUCTIONS for creating and updating Configuration Profiles are located in the
"ST100 App User Guide", section "Configuration Guide".
NOTE: Up to this point, all steps are considered to be pre-operational and the device has not begun a billing
cycle. Completing the Activation Mode will begin the customer billing cycle.
ACTIVATION MODE
1.
The unit enters Activation mode when:
a.
It detects exposure to apparent sunlight and
the battery is charging; Defined as a positive
current with continuous flow to the battery for 5
consecutive minutes and acquires a GPS Fix.
2.
To verify activation, open the ST100 Configuration Tool
and navigate to the Scan screen, tap your UID and
connect to the device that you would like to review.
a.
Verify the Expiration date
b.
If the device has not been set, the Expiration date
will display "Timer Not Started".
c.
Repeat conditions from Step 1 (above) until an
Expiration date is obtained.
3.
Open the settings icon
access the ST100 Mobile App User Guide for more
information on customizing the device.
A Configuration Profile must be provided from the VAR
prior to Activation. During this stage, the VAR transitions the
device from original factory settings to Activation Mode by
setting a lifetime and profile for the unit.
has been set.
from the Scan screen to
Advertisement
