Installing The Memory; Mm Population Rule - Gigabyte H262-NO0 User Manual

3-7-2 Installing the Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-7-3 MM Population Rule

Be sure to install DDR4 DIMMs on this motherboard.
• The initial DIMMs installed must be installed in the primary CPU (CPU0) memory slots first.
• When populating DIMMs into a channel, slot numbers having the suffix "0" must be populated first,
then
followed by slot numbers having the suffix "1".
• A combination of LRDIMMs and RDIMMs is not allowed in the same channel.
• A combination of non-3DS and 3DS LRDIMMs is not allowed in the same channel.
Ranks Per DIMM
Type
and Data Width
SRx8
SRx4
RDIMM
DRx8
DRx4
RDIMM 3DS (4R/8R) x 4
LRDIMM QRx4
LRDIMM QRx4
3DS (4R/8R) x 4
1
DIMM Capacity (GB)
DRAM Density
8Gb 16Gb
8GB 16GB
16GB 32GB
16GB 32GB
32GB 64GB
2H-64GB 2H-128GB
4H-128GB 4H-256GB
64GB 128GB
2H-64GB 2H-128GB
4H-128GB 4H-256GB
- 33 -
2
Speed (MT/s); Voltage (V);
Slots per Channel(SPC) and DIMM per Channel
(DPC)
1DPC
1.2V
3200
System Hardware Installation
2DPC
1.2V