Mains Filters - Fagor BCSD CAN Installation Manua

1.2.

Mains filters

It is recomended to insert a mains filter at each axis.
MANDATORY.
In order to comply with European Directive 2014/35/EU on Low Voltage (LVD) and
2014/30/EU on Electromagnetic Compatibility (EMC), it is mandatory to insert a mains
filter in the system.
Use the noise filter manufactured by · SCHAFFNER · at the brake power input for servomotors
with holding brakes.
Relationship between servo drive power and noise filter current:
SERVO DRIVE POWER NOISE FILTER CURRENT
0.75 kW
1.0 kW
1.5 kW
Note:
 single-phase servo drive should apply a two-phase filter. A three-phase servo drive
should apply a three-phase filter.
 Choose the right filter according the specifications of operating voltage, current, and
manufacturer.
 Recommended noise filter of 400 Vac servo drive:
SERVO DRIVE MODEL
BCSD-10DMG
BCSD-15DMG
BCSD-20DMG
BCSD-30DMG
BCSD-50DMG
Beta series CANopen Servo Drives | Ref.2102
SERVO DRIVE POWER NOISE FILTER CURRENT
4 A 2.0 kW
4 A 3.0 kW
6 A 5.0 kW
· JIANLI · NOISE FILTER
DL-5EB
DL-10EB
DL-10EB
DL-15EB3
DL-25EB3
Installation manual
8 A
12 A
20 A
· SCHAFFNER · NOISE FILTER
FN3025HP-10-71
FN3025HP-10-71
FN3025HP-10-71
FN3025HP-20-71
FN3025HP-30-71
BCSD CAN - 15|60