Before Using - Singer BSM203 Instruction Manual

Lint remover
Table of Contents

Advertisement

Available languages

Available languages

BEFORE USING

Please pay special attention to the following parts.
1 ]
3 ]
Test at an inconspicuous area of the clothes before using.
The lint remover has a protection function. Please make sure to tighten the
Mesh cover attachment ring to allow product to properly function.
INSTRUCTION FOR USING YOUR SINGER
Remove the battery cover on the lower end of the handle by sliding the
cover off of handle.
Insert 2×1.5V AA batteries (not included) according to diagram in the
compartment, then reattach battery cover
NOTE: Only use with non-rechargeable batteries.
For best results, place garment on a hard, flat surface before using product
to remover lint.
Press button in handle to turn "on", then run over the worn areas of fabric
with light pressure to give them a clean, soft new look.
Work lint remover evenly over the area on garment where necessary.
Continuous application on a fixed area may wear out garment.
When garment is clear of lint, press button in handle to turn "off".
1 ]
Around buttons and zippers
2 ]
Remove the foreign objects
stuck on clothes
2 ]
3 ]
Thin or easily torn parts
4 ]
Seams or edges
4 ]
LINT REMOVER
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents