D-Link DWR-921 User Manual page 33

Section 4 - Configuration
A higher channel width allows for faster data transmission, at the
Channel Width:
possible expense of wireless coverage and compatibility with
older wireless clients. Select the optimum channel width for your
wireless network from the drop-down menu.
The default setting is Visible. Select Invisible if you do not want
Visibility Status:
to broadcast the SSID of your wireless network.
Select the desired wireless encryption mode. WPA/WPA2 is
Security Mode:
recommended if your clients support it.
If you choose WEP, the following options will appear:
Select whether to use 64-bit or 128-bit encryption.
WEP Key Length:
Select whether to use Open or Shared authentication.
Authentication:
Set the WEP key/password for your wireless network. Based on
WEP Key 1:
whether you are using 64 or 128-bit encryption, and whether
you are using a HEX or ASCII key, you will need to enter different
numbers of characters for your key, as indicated below the WEP
Key text box. ASCII keys may use letters and numbers only, and
HEX keys may use numbers 0-9 and letters A-F only.
If you choose WPA-Personal, the following options will appear:
Select whether to use WPA2 only or Auto (WPA or WPA2). WPA2
WPA Mode:
only is the strongest, provided that all of your clients can support
it.
Select whether to use the TKIP or AES cipher. The AES cipher is
Cipher Type:
the strongest, provided that all of your clients can support it.
Enter the key/password you want to use for your wireless network.
Pre-Shared Key:
The key must be between 8 and 63 characters long, and may only
contain letters and numbers.
D-Link DWR-921 User Manual 29