After-Sales Service; Accessories For Circulating-Air Mode - Bosch DWB128E51 Instruction Manual

After-sales service

Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate with these numbers can be
found inside the appliance (remove the metal mesh grease
filter to gain access).
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
O
After-sales service
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
After-sales contact details for all countries can be found in the
attached after-sales service directory.

Accessories for circulating-air mode

(not included in the delivery)
Notes
Follow the installation instructions supplied with the
■
accessories.
For appliances with an additional internal filter, only the
■
CleanAir recirculation module can be used.
Basic equipment: Starter set for circulating-air mode - narrow
1
Throw-away filter
2
Basic equipment: Starter set for circulating-air mode - wide
3
FD no.
Throw-away filter
4
Basic equipment: CleanAir recirculation module - narrow
5
Throw-away filter
6
Basic equipment: CleanAir recirculation module - wide
7
Throw-away filter
8
1 DHZ 5325 channel width 260 mm
2 DHZ 5326 channel width 260 mm
3 DHZ 5345 channel width 345 mm
4 DHZ 5346 channel width 345 mm
5 DSZ 6200 channel width 260 mm
6 DSZ 5201 channel width 260 mm
7 DSZ 6240 channel width 345 mm
8 DSZ 5201 channel width 345 mm
11