Page 4
Press the button for 3 seconds to enter the boost and the button indicator will be blink. Boost will continue 10 minutes. After 10 minutes ,it will be go back previous speed. If the control panel printed with ,press the button to enter the boost.Boost will continue 10 minutes.After 10 minutes,it will be go back previous speed.
Page 8
Fix the mounting plate with M5x16 screw to prevent the cooker hood falling off accidentally. Fix the exhaust pipe to the pipe socket of the cooker hood to ensure the exhaust pipe and the socket fixed tightly. Please follow the steps 1 / 2 / 3 / 4 / 5 / 6 shown in the following figure to find the installation position of the plate on the wall.
Page 9
Instruction method: Ú step 1: Align the valve body with the smoke hole on the wall. Drill holes in the wall according to the hole step 2: of valve seat. step 3: Nail the expansion plastic plug into the wall. step 4: Fix the valve seat with screws.
Need help?
Do you have a question about the DWBA68G60I and is the answer not in the manual?
Questions and answers