Page 1
THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this Craft 42 in. White 3 Drawer Table with Shelf. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents............2 Pre-assembly (continued)...........4 Package Contents..............4 Safety Information............2 Warranty..............2 Notification..............5 Pre-assembly..............3 Assembly..............6-11 Planning Assembly..............3 Maintenance...............12 Tools Required..............3 Care and Cleaning............12 Hardware Included ...............3 Troubleshooting............12 Safety Information DANGER CAUTION Do not use power tools to assemble your item.Power tools Keep small parts away from children during assembly.
Assembly Assemble lower drawer a) Insert wood dowels (CC) into panel (J) ,then d) Screw bolts (EE) into panel (O). assemble panel (J) and panels (K/L) by rotating the flat head screws (FF). e) Insert wood dowels (CC) into panels (K/L/N) , b) Insert the panel (M) into slot correctly then rotate the cam locks (DD) tight to assemble panels (K/L/N) and panel (O).
Page 7
Assembly Assemble upper two drawers a) Assemble panel (P) and panels (Q/R) by d) Screw bolts (EE) into panel (S). rotating the flat head screws (FF). e) Insert wood dowels (CC) into panel (N) , then b) Insert the panel (M) into the slot correctly. rotate the cam locks (DD) tight to assemble panels (N/Q/R) and panel (S).
Page 8
Assembly Assemble side panels a) Screw big cam lock bolts (BB) into the side c) Lock the following panels by using big cam locks (AA) & panels (B/C). Then install panels (H/G) by screws (GG) as shown. tightening the screws (GG). b) Connect panels in alignment with holes as illustration below.
Page 9
Assembly Assemble top & back panels a) Screw bolts(BB) into panel A as shown c) Tighten the big cam locks (AA) as shown. d) Insert the screws (HH) to the back panel (I) through b) Align and join the panel (A) to pre-drilled holes as shown. holes shown below.
Page 10
Assembly Assembly Insert the drawers Insert the drawer into the assembled body as shown. 1.Pull out slide.Slide bearings forward. 3.Insert into slide slot correctly, 2.Pull slide back inside. push the drawer into the Repeat for every slide! body with even force. NOTE: Make sure the slide piece is at the front end of the glide when installing the drawer into the body.
Page 11
Assembly Adjust the foot leveler and assemble Anti-tipping hardware b) Lock the two hardware on the product and the other two hardware lock on the wall,then lock the package product with a plastic strip. a) Adjust the foot leveler. Wall Floor Wall IF THE GROUND IS NOT EVEN, THE SIDEBOARD WILL BE UNSTABLE OR THE...
Maintenance If your furniture is stained or otherwise damaged during use, contact a professional for repairs. Care and Cleaning Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test the polish in an inconspicuous area before using over the entire surface of the product.
Page 13
StyleWell. Questions, problems, missing parts? Before returning to the store, call Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the JS-3437-A and is the answer not in the manual?
Questions and answers