Advertisement
15.
Always remove keys and wrenches
after use. Before switching on, make sure
that all keys and wrenches have been
removed from the tool.
16.
Avoid unsupervised operation.
Never carry mains-powered tools with your
OFF when connecting the tool to the mains.
17.
Outdoor use of extension cables.
For outdoor use, only use approved and
appropriately labelled extension cables.
18.
Be alert at all times.
Observe your work. Work carefully. Never
use the electric tool when you are
distracted.
19.
Check the appliance for damage.
Before using the equipment further, check
that safety equipment or slightly damaged
parts are in good working order and function
correctly. Check that the moving parts are
working correctly, that they do not jam, and
that no parts are damaged. Make sure that
the equipment remains safe to use.
Damaged safety devices and parts must be
repaired or replaced by experts in a
customer service workshop, unless
otherwise stated in the manual. Damaged
switches must be replaced by a customer
service workshop. Do not use equipment for
which the on-off switch does not correctly
function.
20.
Important!
For your own safety, only use accessories
and auxiliaries which are stated in the
operating instructions or which have been
recommended or indicated by the
manufacturer. Use of any other attachments
or accessories than those stated in the
operating instructions or in the catalogue
could lead to personal injury.
21.
Repairs should only be done by an
expert. This electric tool complies with the
pertinent safety regulations. Repair work
may only be carried out by an electrician.
Otherwise there is a risk of accidents for the
operator.
22.
Attach the dust extraction system.
If there are apparatuses available for the
attachment of the dust extraction system,
make sure these are connected and used.
After Sales Support
TEL: 1300 922 271
3. Layout
1.
Drill chuck
2.
Drill depth stop
3.
Drill/hammer drill selector switch
4.
Locking button
5.
ON/OFF switch
6.
Speed controller
7.
Clockwise/Counter-clockwise switch
8.
Additional handle
9.
Dust extraction adapter
10. Gear selector switch
11.
Dust extraction
4. Items supplied
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
•
Hammer drill
•
Drill depth stop
•
Dust extraction adapter
•
Dust extraction
•
Original operating instructions
•
Safety instructions
5. Proper use
The drill is designed for drilling holes into wood,
iron, non-ferrous metals and rock using the
appropriate bits.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
EMAIL: service.australia@einhell.com
8
Advertisement
