Dimplex DGR32WNG Installation And User Manual page 13

Installation
4 4
Install the wall-mounting bracket
!
NOTE: If installing to the ceiling using
DGRPOLE (sold separately), skip this step.
1. Secure the mounting bracket to the wall
using 6 fasteners (not included). Ensure
suitable mounting hardware for the wall
material is used.
Secure the heater to the
5 5
mounting bracket
1. Install the heater to the mounting bracket
using hardware D, E, F, and G as shown.
D
E
F
G
2. If using ceiling-mounting pole DGRPOLE
(sold separately), follow the installation
instructions provided with the DGRPOLE.
Install Cords
6 6
1. Remove the finger protective rings from the
trigger.
2. Install the red cord to "ON" trigger.
3. Install the black cord to "OFF" trigger.
Figure 6
This side up
Figure 7
E
D
Figure 8
Red Cord
F
G
Black Cord
13