Daily Use - Rapid Group WX 90 Operating Instructions Manual

8.2 Start
Make sure all the joint parts without leakage. The tube outlet must
be fixed well so to avoid pressure leaking.
8.3. Electrical Connections
• Terminal strip box complete of:
- ON/OFF switch;
- Speed regulating knob switch
- Speed regulating circuit board
• 5M Power cable
ATTENTION!
IT IS THE INSTALLER'S RESPONSIBILITY TO PREFORM THE
ELECTRICAL CONNECTIONS WITH RESPECT FOR THE
APPLICABLE REGULATIONS.

9. DAILY USE

Long time continuous running may cause motor overheating, the
overheating protection system will cut the power automatically. The
motor can be restarted work again after cooling down by pressing the
on/off button.
ATTENTION!
The suggested duty cycle is 2 hours. Do not exceed one
hour when the environment temperature more than 30˚C
Please change the electric brush every 250-300hours
10. NOISE LEVEL
Under normal working conditions the noise emission from all models
does not exceed the valve of 80 db at a distance of 1 meter from
the electric pump.
+49 (6155) 84 20-0
AC Switch
Speed
M
regulating
circuit
board
5