Machine Description; Technical Data - Rapid Group WX 90 Operating Instructions Manual

3.7. Install the filters in the pump tube bottom when transport the
liquids with impurity or solids. To avoid the blocking, please check
and clean it regularly.
3.8. Make sure the motor under close status before power on.
Never leave the pump unattended and never operate the motors
without pump.
3.9. Do not touch the tube bottom after switching on the electric or
air source. The impeller under high speed rotating may lead to
equipment damage and personal injury.
Make sure the pump tube working under vertical position. Never
upend or lay flat after using. Pay attention to the residual liquids
may lead to injury or cause environmental damage.

4. MACHINE DESCRIPTION

MOTOR: AC series motor with the overheating protection components,
Quick coupling adapter, Automatic positioning coupling and
Adjustable speed switch.
ATTENTION!
• Never operate the motors without pump.
• Never leave the pump unattended.
• Never run dry of the pump.
• The pump should not be immersed deeper into the liquid than
the outlet connection.

5. TECHNICAL DATA

Electrical Data
PUMP
MODEL
Current
17004501 AC
17004502 AC
ELECTRICAL POWER
Voltage(V) Power (W)
230
120
Load Speed
(RPM)
450 3000~11000
450 3000~11000
+49 (6155) 84 20-0
Rated Speed
(RPM)
20000
20000
3