Advertisement
Pairing the headphones
1.
Press and hold the power on/off button until the indicator light flashes red and
blue and the voice prompt says "power on".
2.
Turn on Bluetooth function on mobile device. Then select "ANC300" from the
device available list to pair.
3.
Once pairing is successful, indicator will light up blue and the voice prompt will
state "audio device connected".
*
The headphones that has been previously paired with another device will
automatically connect with the device if the device is powered on and within
operating range.
Charging the headphones
●
Connect the USB charging cable (included) to the charging port on the bottom of
right side of headphones and other end to a USB power source.
●
Charge indicator light next to charging port will be red while charging and turn off
when the headphones are fully charged.
·2·
Advertisement
