Active noise cancelling wireless headphones (10 pages)
Summary of Contents for Qudo QDPRANCBK
Page 1
Active Noise Cancelling Wireless Headphones INSTRUCTION MANUAL QDPRANCBK The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Officeworks Ltd. is under license.
Bluetooth Pairing Press and hold LED will flash red 3 sec and blue when ready to connect Bluetooth Bluetooth Devices 16BN01 Paired Now discoverable In your device‘s Bluetooth settings activate bluetooth and select ” 16BN01” enter the PIN ‘0000’ if needed The blue LED light will be on and flash to indicate the headphone is connected...
Active Noise Cancelling (ANC) Function Turning ON: Slide the ANC switch on the right headphone to ON, the indicator light on the switch will turn red. The ANC function uses more power when turned on and will reduce the time between charge of the headphones.
Page 7
Charging Plug micro-USB cable into computer’s USB port Plug micro-USB cable into USB wall charger Charging Before using the headphone for the first time, charge it for at least two hours Low battery alert When battery voltage less than 3.3V, the Headphone will be warning and have tone speak out from speaker.
Trouble Shooting Do not expose the device to water or attempt to disassemble the device turn on Headphones will not Ensure headphones are fully charged before turning it on. My mobile device is unable to find the Bluetooth headphones Check that the headphones is in pairing mode (blue/red indicator lights flashing). Remove“...