GE GDF510PGDBB Manual page 75

Main Conduit Removal
Remove Upper Spray Arm to access 1/4 " hex head screw
which secures top of Main Conduit
(immediately behind
Upper Spray Arm)
Remove 2 - ¼" hex head screws to remove Mid Docking Cone
Remove 4 ¼" hex head screws to remove Conduit Plate.
Pull up on plate then pull plate off the conduit, notice the
conduit seal
(must be re-installed to ensure proper seal
and operation).
Conduit can now be removed by unhooking from the heater
75 /
Copyright General Electric 2011
9/23/2012