CONCORD JamCam 3.0 User Manual page 5

1
Shoot
great digital pics
It's easy to get started taking great photos with
JamCam 3.0. Here are some important tips and an
overview of the camera functions.
The Battery Life Indicator
JamCam 3.0 does require a 9V
alkaline battery. See back cover page
for insert instructions. The remaining
power of the camera's 9V battery
is indicated in the upper right
corner of the LCD and has four
settings ( full, half, low and empty).
Turning JamCam 3.0 On and Off
To turn JamCam 3.0 on, press the
On/Off/Select button (see diagram on
previous page). By default, the camera
will be set to flash and will tell you that
you have 8 R2 pictures remaining ( see next page for
more information).
To turn JamCam 3.0 off, press and hold
the On/Off/Select button (for about 4
seconds) until the LCD screen reads OFF.
Release the button.
Taking Pictures with JamCam 3.0
To take a picture, aim through
the viewfinder and press the
shutter button until the red
LED light goes on. While the
light is on, the subject and the
camera should stay steady. When the red LED light
goes off, the picture has been stored.
Click! Click! – Tips for better pics
1. Hold that pose! – Digital cameras take a few
Full
2. Get out of my face! – JamCam 3.0 takes its best
3. Indoors and Outdoors – No matter what the
Low
( Empty when flashing)
For more information on how to improve your photos after
you have taken them, see pages 6-10.
Additional features and functions
of the JamCam 3.0:
Using the Self-Timer
Press the Menu button until the self-
timer icon
On/Off/Select button to turn the
self-timer on or off. After you press the
seconds to adjust for lighting. Hold your camera
still until you see the red LED light go off.
pictures at 3 to 8 feet away from the subject.
lighting, JamCam 3.0 has the situation covered.
The built-in flash can automatically assess the
setting and flash if necessary.
is selected. Use the
3